Netgear S3300-28X (GS728TX) - ProSAFE S3300 Smart Switch Series 관리자 가이드
Configure System Information
54
S3300 Smart Switch
practice of temporarily advancing clocks during the summer months. Typically clocks are
adjusted forward 1 or more hours near the start of spring and are adjusted backward in
autumn.
adjusted forward 1 or more hours near the start of spring and are adjusted backward in
autumn.
To configure the summer time settings:
1.
Select System
Management
Time
Summer Time Configuration.
2.
Next to Summer Time, select one of the following options:
•
Recurring. Summer time occurs at the same time every year. The start and end times
and dates for the time shift must be manually configured.
and dates for the time shift must be manually configured.
•
Recurring EU. The system clock uses the standard recurring summer time settings
used in countries in the European Union. When this field is selected, the rest of the
applicable fields on the screen are automatically populated and cannot be edited.
used in countries in the European Union. When this field is selected, the rest of the
applicable fields on the screen are automatically populated and cannot be edited.
•
Recurring USA. The system clock uses the standard recurring daylight saving time
settings used in the United States. When this field is selected, the rest of the
applicable fields on the screen are automatically populated and cannot be edited.
settings used in the United States. When this field is selected, the rest of the
applicable fields on the screen are automatically populated and cannot be edited.
•
Non Recurring. Summer time settings are in effect only between the start date and
end date of the specified year. When this mode is selected, the summer time settings
do not repeat on an annual basis.
end date of the specified year. When this mode is selected, the summer time settings
do not repeat on an annual basis.
3.
If the selected summer time mode is Recurring or Non Recurring, set the start and end times
for the time shift:
for the time shift:
•
Begins At. From the appropriate lists, select the date and time on which summer time
begins.
begins.
•
Ends At. From the appropriate lists, select the date and time on which summer time
ends.
ends.
4.
In the Offset field, specify the number of minutes to shift the summer time from the standard
time.
time.
5.
In the Zone field, specify the acronym associated with the time zone when summer time is in
effect.
effect.
This field is not validated against an official list of time zone acronyms.
6.
Click the Apply button.
The Summer Time Status table shows information about the summer time settings and
whether the time shift for summer time is currently in effect.
whether the time shift for summer time is currently in effect.
Denial of Service
Use the Denial of Service (DoS) feature to configure DoS control. The switch software
provides support for classifying and blocking specific types of DoS attacks.
provides support for classifying and blocking specific types of DoS attacks.
Configure Auto-DoS
The Auto-DoS Configuration screen lets you automatically enable all the DoS features
available on the switch, except for the L4 Port attack. For information about the types of DoS
attacks the switch can monitor and block, see
available on the switch, except for the L4 Port attack. For information about the types of DoS
attacks the switch can monitor and block, see