Netgear GS752TXS - Stackable Smart Gigabit Ethernet Switch 사용자 설명서
106
|
Chapter 4: Configuring Switching Information
GS752TXS Smart Switch Software Administration Manual
2.
From the Voice VLAN Aging Time field, specify the amount of time after the last IP phone’s
OUI is aged out for a specific port. The port will age out after the bridge and voice aging
time.
3.
Click Cancel to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.
4.
If you make any changes to this page, click Apply to send the updated configuration to the
switch.
Voice VLAN Port Setting
To display the Voice VLAN Port Setting page, click Switching
Voice VLAN
Advanced
Port Setting
.
To configure Voice VLAN port settings:
1.
Select the check box next to the port to configure. You can select multiple check boxes
to apply the same setting to all selected ports.
2.
Go To Interface
- Enter the Port to be configured and click on the Go button.
3.
From the Voice VLAN Mode menu, specify whether to enable or disable Voice VLAN on the
selected port.
4.
From the Voice VLAN ID menu, set the Voice VLAN ID to be used for voice traffic. The
default value is 2.
5.
From the Remark CoS menu, specify whether to enable or disable class of service remarks
on the selected port.
6.
From the Class of Service column, the CoS tag value to be reassigned for packets
received on the voice VLAN when Remark CoS is displayed when this feature is enabled.
7.
Click Cancel to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.