Netgear GS752TXS - Stackable Smart Gigabit Ethernet Switch 사용자 설명서
Chapter 4: Configuring Switching Information
|
147
GS752TXS Smart Switch Software Administration Manual
The following table describes the information available for each entry in the address table.
Field
Description
VLAN ID
Specifies the VLAN ID on which the IGMP Snooping Querier is
administratively enabled and for which VLAN exists in the VLAN database.
administratively enabled and for which VLAN exists in the VLAN database.
MAC Address
A unicast MAC address for which the switch has forwarding and/or filtering
information. The format is a six-byte MAC address with each byte separated
by colons. For example, 00:0F:89:AB:CD:EF.
information. The format is a six-byte MAC address with each byte separated
by colons. For example, 00:0F:89:AB:CD:EF.
Interface
The port where this address was learned: that is, this field displays the port
through which the MAC address can be reached.
through which the MAC address can be reached.
Status
The status of this entry. The possible values are:
•
Static
: The entry was added when a static MAC filter was defined.
•
Learned
: The entry was learned by observing the source MAC
addresses of incoming traffic, and is currently in use.
•
Management
: The system MAC address, which is identified with
interface c1.
Dynamic Address Configuration
Use the Dynamic Addresses page to set the amount of time to keep a learned MAC address
entry in the forwarding database. The forwarding database contains static entries, which are
never aged out, and dynamically learned entries, which are removed if they are not updated
within a given time.
entry in the forwarding database. The forwarding database contains static entries, which are
never aged out, and dynamically learned entries, which are removed if they are not updated
within a given time.
To access the Configuration page, click Switching
Address Table
Advanced
Dynamic
Addresses
.
To configure the Dynamic Address setting: