Netgear GS752TXS - Stackable Smart Gigabit Ethernet Switch 사용자 설명서
![Netgear](https://files.manualsbrain.com/attachments/cf1ad5de25a3f8d6c88ef0ab489c1b137eebe11f/common/fit/150/50/17742d1e0cdacf24edeb88c30757620088415c5f7699f69b4517262e21e0/brand_logo.jpeg)
Chapter 7: Managing Device Security
|
211
GS752TXS Smart Switch Software Administration Manual
To configure global 802.1X settings:
1.
Select the radio button in the Port Based Authentication State field to enable or
disable 802.1X administrative mode on the switch.
•
Enable
. Port-based authentication is permitted on the switch.
Note:
If 802.1X is enabled, authentication is performed by a RADIUS
server. This means the primary authentication method must be
RADIUS. To set the method, go to Security
RADIUS. To set the method, go to Security
Management
Security
Authentication List
and select RADIUS as method 1 for
201.
•
Disable
. The switch does not check for 802.1X authentication before allowing traffic
on any ports, even if the ports are configured to allow only authenticated users.
2.
Select the radio button in the VLAN Assignment Mode field. Select Enable and Disable.
The default value is Disable.
3.
Select the radio button in the Dynamic VLAN Creation Mode field. This lists two options
for Dynamic VLAN Creation Mode: Enable and Disable. The default value is Disable.
4.
Click Cancel to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.
5.
If you change the settings, click Apply to apply the new settings to the system.
Port Authentication
Use the Port Authentication page to enable and configure port access control on one or more
ports.
ports.
To access the Port Authentication page, click Security
Port Authentication
, and then click
the Advanced
Port Authentication
link.
Note:
Use the horizontal scroll bar at the bottom of the browser to view all
the fields on the Port Authentication page. The figures on the
following page are both images of the Port Authentication page.
following page are both images of the Port Authentication page.