Netgear GS752TXS - Stackable Smart Gigabit Ethernet Switch 사용자 설명서
Chapter 8: Monitoring the System
|
257
GS752TXS Smart Switch Software Administration Manual
Use the buttons at the bottom of the page to perform the following actions:
•
Click Clear to clear all the counters. This resets all statistics for this port to the default
values.
•
Click Refresh to refresh the data on the screen and display the most current statistics.
EAP Statistics
Use the EAP Statistics page to display information about EAP packets received on a specific
port.
port.
To display the EAP Statistics page, click the Monitoring
Ports
tab, and then click the EAP
Statistics
link.
The following table describes the EAP statistics displayed on the screen.
802.3x Pause Frames
Transmitted
Transmitted
A count of MAC Control frames transmitted on this interface with an opcode
indicating the PAUSE operation. This counter does not increment when the
interface is operating in half-duplex mode.
indicating the PAUSE operation. This counter does not increment when the
interface is operating in half-duplex mode.
EAPOL Frames Received
The number of valid EAPOL frames of any type that have been received by
this authenticator.
this authenticator.
EAPOL Frames
Transmitted
Transmitted
The number of EAPOL frames of any type that have been transmitted by this
authenticator.
authenticator.
Time Since Counters Last
Cleared
Cleared
The elapsed time, in days, hours, minutes, and seconds since the statistics for
this port were last cleared.
this port were last cleared.
Field
Description