Netgear GS752TXS - Stackable Smart Gigabit Ethernet Switch 사용자 설명서
272
|
Chapter 9: Maintenance
GS752TXS Smart Switch Software Administration Manual
To reboot the switch:
8.
Select the check box on the page.
9.
Click Apply. The switch resets immediately. The management interface is not available until
the switch completes the boot cycle. After the switch resets, the login screen appears.
Factory Default
Use the Factory Default page to reset the system configuration to the factory default values.
Note:
If you reset the switch to the default configuration, the IP address is
reset to 192.168.0.239, and the DHCP client is enabled. If you loose
network connectivity after you reset the switch to the factory
defaults, see
network connectivity after you reset the switch to the factory
defaults, see
12.
To access the Factory Defaults page, click Maintenance
Reset
Factory Default
.