Netgear GS752TXS - Stackable Smart Gigabit Ethernet Switch 사용자 설명서
68
|
Chapter 2: Configuring System Information
GS752TXS Smart Switch Software Administration Manual
Click Refresh to refresh the page with the most current data from the switch.
LLDP-MED Port Settings
Use this page to enable LLDP-MED mode on an interface and configure its properties.
To display this page, click System
LLDP
Advanced
LLDP-MED Port Settings
.
To configure LLDP-MED settings for a port:
1.
From the Port field, select the port to configure.
2.
From the LLDP-MED Status field, enable or disable the LLDP-MED mode for the selected
interface.
3.
From the Notification field, specify whether the port should send a topology change
notification if a device is connected or removed.
4.
From the Transmit Optional TLVs field, specify whether the port should transmit optional
type length values (TLVs) in the LLDP PDU frames. If enabled, the following LLDP-MED
TLVs are transmitted:
•
MED Capabilities
•
Network Policy
•
Location Identification
•
Extended Power via MDI: PSE
User Priority
Specifies the priority associated with the policy.
DSCP
Specifies the DSCP associated with a particular policy type.
Field
Description