Netgear FS728TLP – ProSAFE 24 ports smart switch PoE 사용자 가이드
Introduction
13
ProSAFE FS526Tv2, FS726Tv2, and FS728TLP Smart Switches
Change the Language (Model FS726Tv2 Only)
The web management interface of model FS726Tv2 provides a Language menu that lets you
select the Chinese or English language. The Language menu is located to the left of the
Logout button and is accessible from any screen.
select the Chinese or English language. The Language menu is located to the left of the
Logout button and is accessible from any screen.
Figure 1. Detail of the Language menu of model FS726Tv2
To change the language:
From the Language menu, select one of the following languages:
•
Chinese.
•
English.
The web management interface restarts with the selected language.
Allowed Characters for User-Defined Fields
On screens in the web management interface, user-defined fields can contain 1 to 159
characters, unless otherwise noted on a screen. You can use any character, except for the
following, unless specifically noted onscreen:
characters, unless otherwise noted on a screen. You can use any character, except for the
following, unless specifically noted onscreen:
\
<
/
>
*
|
?
Use the Device View Screen as an Alternate Way to
Configure the Smart Switch
Configure the Smart Switch
The Device View is a Java applet that displays the ports on the smart switch. This graphic
representation provides an alternate way to navigate to configuration and monitoring
screens. The graphic representation also provides information about ports and the
configuration and status of the smart switch and its features.
representation provides an alternate way to navigate to configuration and monitoring
screens. The graphic representation also provides information about ports and the
configuration and status of the smart switch and its features.
Depending on the status of the port, the ports shows a green or red circle:
•
A green circle indicates that the port is connected to a device.
•
A red circle indicates that the port is disabled.
Depending on the status of the port, the LED of the port lights green or yellow or is off:
•
A green LED for a Gigabit Ethernet port indicates that the port is enabled and operating at
a transfer rate of 1000
Mbps.
•
A yellow LED for a Gigabit Ethernet port indicates that the port is enabled and operating
at a transfer rate of either 100
Mbps or 10
Mbps.