Netgear FS728TLP – ProSAFE 24 ports smart switch PoE 사용자 가이드

Specify the settings for the Auto Power Down Mode feature by selecting one of the following 
radio buttons:

Disable. If a port is down or has no link partner, the smart switch does not reduce its 
power consumption. This is the default setting.

Enable. If a port is down or has no link partner, the port enters standby mode 
automatically and checks the status of the link at regular intervals. The smart switch 
reduces its power consumption and does not perform autonegotiation while the link is 
down.

Specify the settings for the Energy-Efficient Ethernet (EEE) power saving mode (also 
referred to as short cable mode) by selecting one of the following radio buttons:

Disable. If a port does not have any frames to process, the port does not enter sleep 
mode, and the smart switch does not reduce its power consumption. This is the 
default setting.

Enable. If a port does not have any frames to process, the port enters sleep mode, 
and the smart switch reduces its power consumption.

Click the Apply button.

The settings are saved.

IEEE 802.1AB defines the Link Layer Discovery Protocol (LLDP) standard, which allows 
stations on a LAN to advertise capabilities and physical descriptions. A network manager can 
view this information to identify the system topology and detect incorrect configurations on 
the LAN.

LLDP is a one-way protocol without request and response sequences. One station transmits 
the information and another station receives and processes the information. You can enable 
or disable transmit and receive functions separately for each port. By default, both transmit 
and receive functions are disabled on all ports.