Netgear FS728TLP – ProSAFE 24 ports smart switch PoE 사용자 가이드



Select System > SNMP > SNMP V1/V2 > Trap Configuration.

The Trap Configuration screen displays.

In the Trap Configuration table, select the check box to the left of the trap receiver that you 
want to remove.

Click the Delete button.

The trap receiver is removed from the Trap Configuration table.

If you configure one or more trap communities, you also need to specify which SNMP traps 
the smart switch can generate and send. When the smart switch detects a condition that is 
identified by an active trap, it sends a trap to the trap communities. 

You can configure some traps on the Trap Flags screen and other traps on screens that let 
you configure the features that the traps are associated with. The smart switch supports the 
following traps:

Cold start trap

Link up/down trap

Authentication failure trap

Bridge new root trap

Bridge topology change trap

RMON alarm trap

PoE port on/off trap

PoE power usage on/off trap

LLDP remote tables change trap

LLDP-MED topology change trap

Learn limit violation trap



Select System > SNMP > SNMP V1/V2 > Trap Flags.