Netgear FS728TLP – ProSAFE 24 ports smart switch PoE 사용자 가이드
Configure VLANs and a Voice VLAN
85
ProSAFE FS526Tv2, FS726Tv2, and FS728TLP Smart Switches
Configure Port VLAN IDs for Ports and LAGs
The Port PVID Configuration screen lets you assign a port VLAN ID (PVID) to a port, LAG, or
both.
both.
There are certain requirements for a PVID:
•
A PVID must be assigned to all ports and LAGs. By default, all ports and LAGs are
assigned to PVID 1 because they are assigned to default VLAN 1. If you do not specify
another PVID, the default VLAN PVID is used for untagged or priority-tagged frames.
another PVID, the default VLAN PVID is used for untagged or priority-tagged frames.
•
If you want to change the default PVID of a port or LAG to a custom PVID, first create a
VLAN that includes the port or LAG as its member (see
VLAN that includes the port or LAG as its member (see
82).
To assign a custom PVID to an interface:
1.
Select Switching
> VLAN > Advanced > Port PVID Configuration.
The Port PVID Configuration screen displays. The following figure does not show all
ports.
ports.