Netgear FS526Tv2 - 24-Port Smart Switch with Gigabit Ports 사용자 가이드

Configure the settings as described in the following table.

Current Server IP Address

This is a nonconfigurable field that displays the primary RADIUS server, 
or, if no RADIUS server is configured as the primary server, the most 
recently added RADIUS server. The field is blank if you did not yet 
configure any RADIUS servers.

Number of Configured Servers

This is a nonconfigurable field that displays the total number of configured 
RADIUS servers. The smart switch supports up to three configured 
RADIUS servers. 

Max Number of Retransmits

The maximum number of times a request packet is retransmitted to the 
RADIUS server. You can specify a number from 1 to 15. The default value 
is 4, which allows for four retransmissions.

Timeout Duration (secs)

The time-out period, in seconds, for a RADIUS request or retransmission 
request. You can specify a number from 1 to 30. The default value is 
5

  seconds.

Accounting Mode

From the menu, select whether RADIUS accounting is enabled:

•

Disable. RADIUS accounting is disabled. This is the default setting.

•

Enable. RADIUS accounting is enabled. You need to configure an 
accounting server (see 

Click the Apply button.

The settings are saved. 

Use the Server Configuration screen to add, view, change, and remove RADIUS servers. You 
can add up to three RADIUS servers, of which only one can be the active (primary) RADIUS 
server.



Select Security > Management Security > RADIUS > Server Configuration.