Netgear FS526Tv2 - 24-Port Smart Switch with Gigabit Ports 사용자 가이드
Manage Access Control Lists
180
ProSAFE FS526Tv2, FS726Tv2, and FS728TLP Smart Switches
Use the ACL Wizard to Create an ACL Based on MAC
Addresses
Before you can use the ACL Wizard to create an ACL that is based on a source or destination
MAC address, first create a MAC ACL name.
MAC address, first create a MAC ACL name.
To create a MAC ACL name and use the ACL Wizard to configure a rule that is based
on the source or destination MAC address:
on the source or destination MAC address:
1.
Select Security > ACL > Basic > MAC ACL Configuration.
The MAC ACL screen displays. The following figure shows an entry in the table as an
example.
example.
2.
In the Name field in the heading of the MAC ACL Table, specify a name for the ACL.
The name can include alphabetic, numeric, hyphen, underscore, or space characters,
and needs to start with an alphabetic character.
and needs to start with an alphabetic character.
3.
Click the Add button.
The ACL is added to the MAC ACL table. No rules are attached yet to the ACL.
Select Devices Based on
TCP/UDP Source Port ID
TCP/UDP Source Port ID
Permit
TCP/UDP Source Port
ID Rule
ID Rule
ACL ID, Protocol Type, Src L4 Port, and
Service Type
Deny
ACL ID, CPU Notification Mode, Protocol Type,
Src L4 Port, and Service Type
Select Devices Based on
TCP/UDP Destination Port
ID
TCP/UDP Destination Port
ID
Permit
TCP/UDP Destination
Port ID Rule
Port ID Rule
ACL ID, Protocol Type, Dst L4 Port, and
Service Type
Deny
ACL ID, CPU Notification Mode, Protocol Type,
Dst L4 Port, and Service Type
Wizard Selection
Link
Screen That Displays Fields and Menus That You Need to Specify