Netgear FS526Tv2 - 24-Port Smart Switch with Gigabit Ports 사용자 가이드
Monitor the Switch and Traffic
267
ProSAFE FS526Tv2, FS726Tv2, and FS728TLP Smart Switches
Clear the SNMP Trap Log
To clear the SNMP trap log:
1.
Select Monitoring > Logs > Trap Log.
The Trap Log screen displays.
2.
Click the Clear button.
All trap messages are removed.
Manage Port Mirroring
Port mirroring lets you select network traffic for analysis by a network analyzer. You can
configure multiple interfaces as source ports, but you can configure only one interface as the
destination or monitor port. Traffic that is mirrored on the monitor port can then be analyzed.
You can configure which traffic is mirrored on a source interface: Incoming packets, outgoing
packets, or both can be copied to the monitor port.
configure multiple interfaces as source ports, but you can configure only one interface as the
destination or monitor port. Traffic that is mirrored on the monitor port can then be analyzed.
You can configure which traffic is mirrored on a source interface: Incoming packets, outgoing
packets, or both can be copied to the monitor port.
A packet that is copied to the monitor port has the same format as the original packet. If the
mirror is copying a packet, the copied packet is VLAN tagged or VLAN
untagged as it is
received or transmitted on the source port.
Configure Port Mirroring
To configure port mirroring:
1.
Select Monitoring > Port Mirroring.
The Port Mirroring screen displays. The following figure shows one port mirroring
configuration as an example.
configuration as an example.