Netgear FS526Tv2 - 24-Port Smart Switch with Gigabit Ports 사용자 가이드
Configuration Examples
309
ProSAFE FS526Tv2, FS726Tv2, and FS728TLP Smart Switches
•
If the port through which the packet enters is not a member of the VLAN that is specified
by the packet’s VLAN ID tag and has ingress-filtering enabled, the packet is dropped.
by the packet’s VLAN ID tag and has ingress-filtering enabled, the packet is dropped.
•
If the port through which the packet enters is a member of the VLAN that is specified by
the packet’s VLAN ID tag and has ingress-filtering enabled, the packet can be sent to
other ports with the same VLAN ID.
the packet’s VLAN ID tag and has ingress-filtering enabled, the packet can be sent to
other ports with the same VLAN ID.
•
Packets leaving the smart switch are either tagged or untagged, depending on the setting
for that port’s VLAN membership properties. A U for a port means that packets leaving
the smart switch from that port are untagged. Inversely, a T for a port means that packets
leaving the smart switch from that port are tagged with the VLAN ID that is associated
with the port.
for that port’s VLAN membership properties. A U for a port means that packets leaving
the smart switch from that port are untagged. Inversely, a T for a port means that packets
leaving the smart switch from that port are tagged with the VLAN ID that is associated
with the port.
VLAN Sample Configuration
This example demonstrates several VLAN scenarios and describes how the smart switch
handles tagged and untagged traffic.
handles tagged and untagged traffic.
To create two new VLANs, change the port membership for default VLAN
1,
and
assign
port members to the two new VLANs:
1.
Select Switching
> VLAN > Basic > VLAN Configuration.
The Basic VLAN Configuration screen displays.
2.
Create the following VLANs:
•
A VLAN with VLAN ID 10
•
A VLAN with VLAN ID 20
3.
Select Switching
> VLAN > Advanced > VLAN Membership.
The VLAN Membership screen displays.
4.
Specify the VLAN membership as follows:
•
For the default VLAN with VLAN ID 1, specify the following members: port 7 untagged
(U) and port 8 (U).
(U) and port 8 (U).
•
For the VLAN with VLAN ID 10, specify the following members: port 1 (U), port 2 (U),
and port 3 tagged (T).
and port 3 tagged (T).
•
For the VLAN with VLAN ID 20, specify the following members: port 4 (U), port 5 (T),
and port 6 (U).
and port 6 (U).
For more information about adding members to a VLAN, see
82.
5.
Select Switching
> VLAN > Advanced > Port PVID Configuration.
The Port PVID Configuration screen displays.
6.
Specify the PVIDs for ports e1 and e4:
•
Port e1. PVID 10.
•
Port e4. PVID 20.