Netgear FS526Tv2 - 24-Port Smart Switch with Gigabit Ports 사용자 가이드
Connect the Smart Switch to Your Network
32
ProSAFE FS526Tv2, FS726Tv2, and FS728TLP Smart Switches
Use Automatic Switch Discovery for a Network without a
DHCP Server
DHCP Server
This section describes how to use the Smart Control Center to set up your smart switch in a
network without a DHCP server. If your network has no DHCP service, you need to assign a
static IP address to your smart switch. If you choose, you can assign it a static IP address,
even if your network has DHCP service.
network without a DHCP server. If your network has no DHCP service, you need to assign a
static IP address to your smart switch. If you choose, you can assign it a static IP address,
even if your network has DHCP service.
To install the smart switch in a network without a DHCP server and access the smart
switch over the web management interface:
switch over the web management interface:
1.
Install the Smart Control Center on your computer in your network.
The Smart Control Center application is on the resource CD that came in the product
package.
package.
2.
Connect the smart switch to the network, which does not include a DHCP server.
For more information, see the installation guide and hardware installation guide for the
smart switch.
smart switch.
3.
Turn on the power to the smart switch by connecting its power cord.
4.
Turn off the firewall on the computer temporarily.
The firewall might prevent the Smart Control Center from discovering the smart switch.
5.
Start the Smart Control Center.
The Network screen displays and the Smart Control Center discovers your smart switch.
6.
If the discovery function of the Smart Control Center does not operate automatically when
you start the Smart Control Center, click the Discover button.
you start the Smart Control Center, click the Discover button.