Netgear FS526Tv2 - 24-Port Smart Switch with Gigabit Ports 사용자 가이드
Configure Basic System Settings
42
ProSAFE FS526Tv2, FS726Tv2, and FS728TLP Smart Switches
The following table describes the nonconfigurable status information that the System
Information screen displays.
Information screen displays.
Table 5. Nonconfigurable fields on the System Information screen
Field
Description
System Information
Serial Number
The serial number of the smart switch.
System Object ID
The MIB object identifier for the smart switch.
Date & Time
The current date and time.
System Up Time
The number of days, hours, minutes, and seconds since the last system
restart.
restart.
Base MAC Address
The Media Access Control address (MAC) address, which is the universally
assigned network address of the smart switch.
assigned network address of the smart switch.
Versions
Model Name
The model name of the smart switch.
Boot Version
The boot code version of the smart switch.
Software Version
The software version of the smart switch.
Configure the IP Settings and Management VLAN for
the Network Interface
the Network Interface
For information about how to connect the smart switch to your network, see
. This section describes how to change the IP
configuration and how to change the management VLAN.
Change the IP Settings
Changing the configuration of the network interface of the smart switch does not affect the
configuration of the front panel ports through which traffic is switched or routed.
configuration of the front panel ports through which traffic is switched or routed.
To change the IP configuration of the network interface:
1.
Select System > Management > IP Configuration.