Netgear FS526Tv2 - 24-Port Smart Switch with Gigabit Ports 사용자 가이드

NETGEAR recommends that you change the default password to a secure password. The 
default password is password. A secure password contains no dictionary words from any 
language and contains uppercase and lowercase letters, numbers, and symbols.

If you lost your password and cannot access the web management interface, your only option 
is to press the Factory Defaults button on the front panel of the smart switch to clear the 
configuration and return the smart switch to the factory settings. Pressing the button for at 
least two seconds causes the smart switch to reboot with factory settings. All custom settings 
are removed, including the password, VLAN settings, and port configurations. The password 
is reset to password, which is the factory default value.



Select Security > Management Security > User Configuration > Change Password.

The Change Password screen displays.

 

Configure the settings as described in the following table.

Old Password

The current password. 

New Password

The new password, which must be between 1 and 
20

 

alphanumeric characters in length and is 

case-sensitive. The setting of the Minimum Password 
Length field determines the minimum required length 
of the password.

Confirm Password

Minimum Password 
Length

The minimum required length of the password. The length can be between 1 and 
20

 

characters. The default minimum length is eight characters.

The password that you enter 
is displayed in asterisks (*).