Netgear XCM8806 - 8800 SERIES 6-SLOT CHASSIS SWITCH 사용자 설명서

A port-based traffic group links a physical ingress port to an egress QoS profile for traffic 
forwarding. To configure a port-based traffic group, use the following command:

configure ports <port_list> {qosprofile} <qosprofile>

If you are using ACL-based traffic groups, use the 

qosprofile

 or 

traffic-queue

 action modifier to select a forwarding queue. Traffic 

that meets any ACL match conditions is not evaluated by other 
traffic groups.

On the NETGEAR 8800 switches, port-based traffic groups apply to 

all packets.

A VLAN-based traffic group links all ports in a VLAN to an egress QoS profile for traffic 
forwarding. All intra-VLAN switched traffic and all routed traffic sourced from the named 
VLAN uses the specified QoS profile. To configure a VLAN-based traffic group, use the 
following command:

configure vlan <vlan_name> {qosprofile} <qosprofile>

If you are using ACL-based traffic groups, use the 

qosprofile

 or 

traffic-queue

 action modifier to select a forwarding queue. Traffic 

that meets any ACL match conditions is not evaluated by other 
traffic groups.

On the NETGEAR 8800 series switches, VLAN-based traffic groups 

apply to all packets. VLAN-based traffic groups are not supported on 
BlackDiamond 20800 series switches.

Creating and Managing Meters

You can configure meters to define bandwidth requirements on NETGEAR 8800 switches. 
The following sections describe how to use meters:

•     Creating Meters 

•     Configuring a Meter