Netgear XCM8806 - 8800 SERIES 6-SLOT CHASSIS SWITCH 사용자 설명서

Configuring Route Redistribution

Exporting routes from one protocol to another and from that protocol to the first one are 
discrete configuration functions. For example, to run OSPF and RIP simultaneously, you 
must first configure both protocols and then verify the independent operation of each. Then 
you can configure the routes to export from OSPF to RIP and the routes to export from RIP to 
OSPF. Likewise, for any other combinations of protocols, you must separately configure each 
to export routes to the other.

Enable or disable the exporting of static, direct, BGP-learned, and OSPF-learned routes into 
the RIP domain using the following commands:

enable rip export [bgp | direct | e-bgp | i-bgp | ospf | ospf-extern1 | 

ospf-extern2 | ospf-inter | ospf-intra | static] [cost <number> {tag <number>} 

| policy <policy-name>]

 

disable rip export [bgp | direct | e-bgp | i-bgp | ospf | ospf-extern1 | 

ospf-extern2 | ospf-inter | ospf-intra | static]

 

These commands enable or disable the exporting of static, direct, and OSPF-learned routes 
into the RIP domain. You can choose which types of OSPF routes are injected, or you can 
simply choose 

ospf

, which will inject all learned OSPF routes regardless of type. The default 

setting is disabled. 

EX_046

ABR

ASBR

ASBR