Netgear XCM8806 - 8800 SERIES 6-SLOT CHASSIS SWITCH 사용자 설명서

configure ospf vlan Chi_160_26_26 priority 10

configure ospf vlan HQ_10_0_2 priority 5

configure ospf vlan HQ_10_0_3 priority 5

enable ospf

Configuration for IR1

The router labeled IR1 has the following configuration:

configure vlan HQ_10_0_1 ipaddress 10.0.1.2 255.255.255.0

configure vlan HQ_10_0_2 ipaddress 10.0.2.2 255.255.255.0

enable ipforwarding

configure ospf add vlan all area 0.0.0.0

configure ospf area 0.0.0.0 priority 10

enable ospf 

In OSPF edge mode, the VLAN priority is “0” and cannot be set. 

on page 674.) When the license is upgraded 

to a Core license, the VLAN priority of “0” needs to be reset in order 
to participate in DR/BDR election. 

Displaying OSPF Settings

You can use a number of commands to display settings for OSPF. To show global OSPF 
information, use the 

show ospf

 command with no options. 

To display information about one or all OSPF areas, use the following command:

show ospf area {<area-identifier>}

 

The 

detail

 option displays information about all OSPF areas in a detail format. 

To display information about OSPF interfaces for an area, a VLAN, or for all interfaces, use 
the following command:

show ospf interfaces {vlan <vlan-name> | area <area-identifier> | enabled}

The 

detail

 option displays information about all OSPF interfaces in a detail format. 

XCM8800 provides several filtering criteria for the 

show ospf lsdb

 

command. You can 

specify multiple search criteria, and only those results matching all of the criteria are 
displayed. This allows you to control the displayed entries in large routing tables.

To display the current link-state database, use the following command: