Netgear XCM8806 - 8800 SERIES 6-SLOT CHASSIS SWITCH 사용자 설명서
828
|
Appendix B. Software Upgrade and Boot Options
NETGEAR 8800 User Manual
During the firmware upgrade, the switch also prompts you to save your configuration
changes to the current, active configuration. Enter
changes to the current, active configuration. Enter
y
to save your configuration changes to
the current, active configuration. Enter
n
if you do not want to save your changes.
The new PSU controller firmware is used immediately after it is installed without rebooting the
switch. The new BootROM and firmware overwrite the older versions flashed into the
hardware. A reboot is required, but not immediately after a firmware upgrade. Use the
switch. The new BootROM and firmware overwrite the older versions flashed into the
hardware. A reboot is required, but not immediately after a firmware upgrade. Use the
reboot
command to reboot the switch and activate the new BootROM and firmware.
During the firmware upgrade, do not cycle down or disrupt the power to the switch. If a power
interruption occurs, the firmware may be corrupted and need to be recovered. XCM8800
automatically attempts to recover corrupted firmware; however, in some situations user
intervention is required.
interruption occurs, the firmware may be corrupted and need to be recovered. XCM8800
automatically attempts to recover corrupted firmware; however, in some situations user
intervention is required.
Power over Ethernet (PoE) firmware is always automatically upgraded or downgraded to
match the operational XCM8800 code image. This configuration is not applicable to PoE
firmware.
match the operational XCM8800 code image. This configuration is not applicable to PoE
firmware.
Displaying the BootROM and Firmware Versions
To display the BootROM (firmware) version on the switch and on all of the modules and PSU
controllers installed in a modular switch, use the
controllers installed in a modular switch, use the
show version
command.
The following is sample output from a NETGEAR 8800 series switch:
Chassis : 800129-00-02 04344-00039 Rev 2.0
Slot-1 : 800114-00-04 04364-00021 Rev 4.0 BootROM: 1.0.1.7 IMG: 11.4.0.23
Slot-2 : 800115-00-02 04344-00006 Rev 2.0 BootROM: 1.0.1.7 IMG: 11.4.0.23
Slot-3 : 800113-00-04 04354-00031 Rev 4.0 BootROM: 1.0.1.7 IMG: 11.4.0.23
Slot-4 :
Slot-5 : 800112-00-03 04334-00040 Rev 3.0 BootROM: 1.0.1.7 IMG: 11.4.0.23
Slot-6 : 800112-00-03 04334-00004 Rev 3.0 BootROM: 1.0.1.7 IMG: 11.4.0.23
Slot-7 :
Slot-8 :
Slot-9 :
Slot-10 :
MSM-A : 800112-00-03 04334-00040 Rev 3.0 BootROM: 1.0.1.7 IMG: 11.4.0.23
MSM-B : 800112-00-03 04334-00004 Rev 3.0 BootROM: 1.0.1.7 IMG: 11.4.0.23
PSUCTRL-1 : 450117-00-01 04334-00021 Rev 1.0 BootROM: 2.13
PSUCTRL-2 : 450117-00-01 04334-00068 Rev 1.0 BootROM: 2.13
Image : NETGEAR version 11.4.0.23 v1140b23 by release-manager
on Thu Feb 16 12:47:41 PST 2006
BootROM : 1.0.1.7