Netgear M5300-52G (GSM7252S) - ProSAFE 48-port Gigabit L2+ Managed Stackable Switch 관리자 가이드

Unless you have previously disabled RIP, you can skip this step since 
RIP is enabled by default.

This sequence enables RIP for the switch. The route preference defaults to 15.

(Netgear Switch) #config

(Netgear Switch) (Config)#router rip

(Netgear Switch) (Config router)#enable

(Netgear Switch) (Config router)#exit

(Netgear Switch) (Config)#exit

Select Routing > RIP > Basic > RIP Configuration. 

A screen similar to the following displays.

For RIP Admin Mode, select Enable radio button.

Click Apply to save the setting.