Netgear M5300-52G (GSM7252S) - ProSAFE 48-port Gigabit L2+ Managed Stackable Switch 관리자 가이드
DNS
509
Managed Switches
2.
Under DNS Server Configuration, in the DNS Server field, enter 12.7.210.170.
3.
Click Add.
4.
In the DNS Server field, enter 219.141.140.10.
5.
Click Add.
Both DNS servers now show in the DNS Server Configuration table.
Manually Add a Host Name and an IP Address
The following example shows commands to add a static host name entry to the switch so that
you can use this entry to resolve the IP address. The example is shown as CLI commands
and as a web interface procedure.
you can use this entry to resolve the IP address. The example is shown as CLI commands
and as a web interface procedure.
CLI: Manually Add a Host Name and an IP Address
(Netgear Switch)#config
(Netgear Switch) (Config)#ip host www.netgear.com 206.82.202.46
(Netgear Switch) (Config)#ip domain-lookup
(Netgear Switch) (Config)#ping www.netgear.com
Send count=3, Receive count=3 from 206.82.202.46
Web Interface: Manually Add a Host Name and an IP Address
1.
Select System > Management > DNS > Host Configuration.
A screen similar to the following displays.
2.
Under DNS Host Configuration, enter the following information:
•
In the Host Name field, enter www.netgear.com.
•
In the IP Address field, enter 206.82.202.46.
3.
Click Add.
The host name and IP address now show in the DNS Host Configuration table.