Netgear M5300-52G (GSM7252S) - ProSAFE 48-port Gigabit L2+ Managed Stackable Switch 관리자 가이드
STP
550
Managed Switches
c. Configure MST ID 2.
•
In the MST ID field, enter 2.
•
In the Priority field, enter 4096.
•
In the VLAN Id field, enter 11.
•
Click Add.
•
In the VLAN Id field, enter 12.
•
Click Apply.
3.
Configure the MST port.
a. Select Switching > STP > MST Port Status.
A screen similar to the following displays.
4.
Under MST Port Configuration, scroll down and select the Interface 1/0/3 check box.
Now 1/0/3 appears in the Interface field at the top.
5.
Enter the following information:
•
In the Port Priority field, enter 128.
•
In the Port Path Cost field, enter 0.
6.
Click Apply.
Configure PVSTP and PVRSTP
Per VLAN Rapid Spanning Tree Protocol (PVRSTP) is similar to Rapid Spanning Tree
Protocol (RSTP) as defined by IEEE 802.1w but with one main difference: PVRSTP runs one
instance per VLAN. That is, each configured VLAN runs an independent instance of PVRSTP
and each instance elects a root bridge independent of another instance. A region can include
as many root bridges as there are VLANs that are configured for PVRSTP. PVRSTP is
equivalent to Cisco’s RPVST+ and can interoperate with it.
Protocol (RSTP) as defined by IEEE 802.1w but with one main difference: PVRSTP runs one
instance per VLAN. That is, each configured VLAN runs an independent instance of PVRSTP
and each instance elects a root bridge independent of another instance. A region can include
as many root bridges as there are VLANs that are configured for PVRSTP. PVRSTP is
equivalent to Cisco’s RPVST+ and can interoperate with it.
Per VLAN Spanning Tree Protocol (PVSTP) is similar to the Spanning Tree Protocol (STP)
as defined by IEEE 802.1d, but with one main difference: PVSTP runs one instance per
VLAN. The protocol is equivalent to Cisco’s PVST+ and can interoperate with it.
as defined by IEEE 802.1d, but with one main difference: PVSTP runs one instance per
VLAN. The protocol is equivalent to Cisco’s PVST+ and can interoperate with it.