Netgear M5300-52G (GSM7252S) - ProSAFE 48-port Gigabit L2+ Managed Stackable Switch 소프트웨어 가이드
Multicast Routing
494
M6100, M5300, and M7100 Series Managed Switches
Configure the IPv6 PIM Candidate Rendezvous Point
To configure the IPv6 PIM candidate rendezvous point:
1.
Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
2.
Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3.
Launch a web browser.
4.
Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
6.
Click the Login button.
The web management interface menu displays.
7.
Select Routing
> IPv6 Multicast > IPv6 PIM > Candidate RP Configuration.
8.
From the list of interfaces, select the Interface.
9.
In the Group Address field, enter the group IPv6 address prefix transmitted in
candidate-RP-advertisements.
10.
In the Prefix Length field, enter the group IPv6 Prefix Length transmitted in
candidate-RP-advertisements
11.
In the C-RP Advertisement Interval, specify the duration in seconds at which the C-RP
messages are unicast to the bootstrap router (BSR).
The range is from 1 to 16383 seconds. The default value is 60 seconds. If this field is
submitted without any value, the default value is used.
submitted without any value, the default value is used.
12.
Click the Add button.
The candidate-RP address is added for the PIM router.
13.
To delete an existing candidate-RP address for the PIM router, click the Delete button .