Netgear M5300-52G (GSM7252S) - ProSAFE 48-port Gigabit L2+ Managed Stackable Switch 소프트웨어 가이드
Configure Quality of Service
514
M6100, M5300, and M7100 Series Managed Switches
8.
Use Interface to select interfaces.
You can specify CoS configuration settings per-interface or for all CoS configurable
interfaces.
interfaces.
9.
Specify which internal traffic class to map the corresponding 802.1p value.
The queue number depends on the specific hardware. The 802.1p Priority row contains
traffic class selectors for each of the eight 802.1p priorities to be mapped. The priority
goes from low (0) to high (3). For example, traffic with a priority of 0 is for most data traffic
and is sent using best effort. Traffic with a higher priority, such as 3, might be
time-sensitive traffic, such as voice or video.
traffic class selectors for each of the eight 802.1p priorities to be mapped. The priority
goes from low (0) to high (3). For example, traffic with a priority of 0 is for most data traffic
and is sent using best effort. Traffic with a higher priority, such as 3, might be
time-sensitive traffic, such as voice or video.
The values in each list represent the traffic class. The traffic class is the hardware queue
for a port. Higher traffic class values indicate a higher queue position. Before traffic in a
lower queue is sent, it must wait for traffic in higher queues to be sent.
for a port. Higher traffic class values indicate a higher queue position. Before traffic in a
lower queue is sent, it must wait for traffic in higher queues to be sent.
10.
Click the Apply button.
The updated configuration is sent to the switch.
Map DSCP Values to Queues
You can specify which internal traffic class to map the corresponding DSCP value.
To map DSCP values to queues:
1.
Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
2.
Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3.
Launch a web browser.
4.
Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
6.
Click the Login button.
The web management interface menu displays.
7.
Select QoS > CoS > Advanced > IP DSCP to Queue Mapping.