Netgear M5300-52G (GSM7252S) - ProSAFE 48-port Gigabit L2+ Managed Stackable Switch 소프트웨어 가이드
Monitor the System
695
M6100, M5300, and M7100 Series Managed Switches
6.
Click the Login button.
The web management interface menu displays.
7.
Select Monitoring > Logs > Trap Logs.
The screen also displays information about the traps that were sent.
Click the Clear button to clear all the counters. This resets all statistics for the trap logs to the
default values.
default values.
The following table describes the Trap Log information displayed on the screen.
View the Event Log
You can view the event log, which contains error messages from the system. The event log is
not cleared on a system reset.
not cleared on a system reset.
Table 243. Trap Logs
Field
Description
Number of Traps Since Last
Reset
Reset
The number of traps that occurred since the switch last rebooted.
Trap Log Capacity
The maximum number of traps stored in the log. If the number of traps
exceeds the capacity, the entries overwrite the oldest entries.
exceeds the capacity, the entries overwrite the oldest entries.
Number of Traps since log
last viewed
last viewed
The number of traps that occurred since the traps were last displayed.
Displaying the traps by any method (terminal interface display, web display,
upload file from switch, and so on) causes this counter to be cleared to 0.
Displaying the traps by any method (terminal interface display, web display,
upload file from switch, and so on) causes this counter to be cleared to 0.
Log
The sequence number of this trap.
System Up Time
The time when this trap occurred, expressed in days, hours, minutes and
seconds, since the last reboot of the switch.
seconds, since the last reboot of the switch.
Trap
Information identifying the trap.