Netgear M5300-52G (GSM7252S) - ProSAFE 48-port Gigabit L2+ Managed Stackable Switch 소프트웨어 가이드
Maintenance
715
M6100, M5300, and M7100 Series Managed Switches
2.
Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3.
Launch a web browser.
4.
Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
6.
Click the Login button.
The web management interface menu displays.
7.
Select Maintenance > Reset > Device Reboot.
8.
In the Reboot Unit No. field, select the unit to reset.
When multiple units are connected in a chassis, select All to reset all the units in the
stack (in other words, the whole chassis) or select the unit number to reset only the
specific unit.
stack (in other words, the whole chassis) or select the unit number to reset only the
specific unit.
9.
Select a radio button:
•
Save prior to reboot
.The current configuration is saved and the switch reboots.
•
Don't save prior to reboot
. The switch will reboot without saving the current
configuration
10.
Click the Apply button.
If you selected the save option, the configuration is saved. The switch reboots.
Power Cycle the Switch
You can use the power cycle feature to reboot the blade if it is not responding.
To power cycle the switch:
1.
Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.