Netgear M5300-52G (GSM7252S) - ProSAFE 48-port Gigabit L2+ Managed Stackable Switch 관리자 가이드
![Netgear](https://files.manualsbrain.com/attachments/cf1ad5de25a3f8d6c88ef0ab489c1b137eebe11f/common/fit/150/50/17742d1e0cdacf24edeb88c30757620088415c5f7699f69b4517262e21e0/brand_logo.jpeg)
Chapter 22. DHCP Server
|
377
ProSafe Managed Switch
CLI: Configure a DHCP Reservation
Note:
The unique identifier is a concatenation of the media type and MAC
addresses. For example, the Microsoft client identifier for Ethernet
address c8:19:24:88:f1:77 is 01:c8:19:24:88:f1:77, where 01
represents the Ethernet media type. For more information, see the
“Address Resolution Protocol Parameters” section of RFC
address c8:19:24:88:f1:77 is 01:c8:19:24:88:f1:77, where 01
represents the Ethernet media type. For more information, see the
“Address Resolution Protocol Parameters” section of RFC
1700.
Web Interface: Configure a DHCP Reservation
1.
Select System > Services > DHCP Server > DHCP Server Configuration. A screen
similar to the following displays.
similar to the following displays.
2.
For Admin Mode, select the Enable radio button.
3.
Click Apply to enable the DHCP service.
(Netgear Switch)#config
(Netgear Switch) (Config)#service dhcp
(Netgear Switch) (Config)#ip dhcp pool pool_manual
(Netgear Switch) (Config)#client-name dhcpclient
(Netgear Switch) (Config)#hardware-address 00:01:02:03:04:05
(Netgear Switch) (Config)#host 192.168.200.1 255.255.255.0
(Netgear Switch) (Config)#client-identifier 01:00:01:02:03:04:05