Netgear M5300-52G (GSM7252S) - ProSAFE 48-port Gigabit L2+ Managed Stackable Switch 관리자 가이드
424
|
Chapter 27. IPv6 Interface Configuration
ProSafe Managed Switch
Configure DHCPv6 Mode on the Routing Interface
The routing interface supports DHCPv6 mode, which can get the IPv6 address from a
DHCPv6 server (address allocation).
DHCPv6 server (address allocation).
Note:
Before you enable DHCPv6 mode, you have to disable IPv6 unitcast
mode globally.
CLI: Configure DHCPv6 mode on routing interface
1.
Enable IPv6 unicast globally.
2.
Enable DHCPv6 on the interface 1/0/23.
(Netgear Switch) (Config)#ipv6 unicast-routing
(Netgear Switch) (Config)#interface 1/0/23
(Netgear Switch) (Interface 1/0/23)#routing
(Netgear Switch) (Interface 1/0/23)#ipv6 enable
(Netgear Switch) (Interface 1/0/23)#ipv6 address dhcp
(Netgear Switch) (Interface 1/0/23)