Netgear M5300-52G (GSM7252S) - ProSAFE 48-port Gigabit L2+ Managed Stackable Switch 관리자 가이드
Chapter 2. VLANs
|
51
ProSafe Managed Switch
Map Private-VLAN Promiscuous Port
The example is shown as CLI commands and as a Web interface procedure.
CLI: Map Private-VLAN Promiscuous Port
Use the following commands to map private-VLAN promiscuous port 1/0/1 to a primary VLAN
(100) and to secondary VLANs (101-102).
(100) and to secondary VLANs (101-102).
Web Interface: Map Private-VLAN Promiscuous Port
1.
1.Map private-VLAN promiscuous port 1/0/1 to a primary VLAN (100) and to selected
secondary VLANs (101-102).
secondary VLANs (101-102).
a. Select Security > Traffic Control > Private VLAN > Private VLAN Promiscuous
Interface Configuration. A screen similar to the following displays.
b. Under Private VLAN Promiscuous Interface Configuration, select the 1/0/1
interface check box. Now 1/0/1 appears in the Interface field at the top.
c. In the Promiscuous Primary VLAN field, enter 100.
d. In the Promiscuous Secondary VLAN field, enter 101-102.
e. Click Apply to save the settings.
(Netgear Switch) #config
(Netgear Switch) (Config)#interface 1/0/1
(Netgear Switch) (Interface 1/0/1)#switchport private-vlan mapping 100 101-102
(Netgear Switch) (Interface 1/0/1)#end