Netgear FVS336Gv2 – ProSafe Dual WAN Gigabit Firewall with SSL & IPSec VPN 참조 매뉴얼

For the default administrative account, the default user name is admin and the default 
password is password.

If you changed the default domain or were assigned a domain, from the Domain menu, 
select the domain.

If you did not change the domain or were not assigned a domain, leave the menu 
selection at geardomain.

Click the Login button.

The Router Status screen displays.

Select Network Configuration > WAN Settings > ISATAP Tunnels.

The ISATAP Tunnels screen displays.

In the List of Available ISATAP Tunnels table, select the check box to the left of each tunnel 
that you want to remove or click the Select All button to select all tunnels.

Click the Delete button.

The selected tunnels are removed from the List of Available ISATAP Tunnels table.

You can display the status of all active 6to4 and ISATAP tunnels and their IPv6 addresses. 



On your computer, launch an Internet browser.

In the address field of your browser, enter the IP address that was assigned to the VPN 
firewall during the installation process.

The VPN firewall factory default IP address is 192.168.1.1.

The NETGEAR Configuration Manager Login screen displays.

In the Username field, type your user name and in the Password / Passcode field, type 
your password.

For the default administrative account, the default user name is admin and the default 
password is password.

If you changed the default domain or were assigned a domain, from the Domain menu, 
select the domain.

If you did not change the domain or were not assigned a domain, leave the menu 
selection at geardomain.

Click the Login button.

The Router Status screen displays.

Select Monitoring > Router Status > Tunnel Status.

The Tunnel Status screen displays.