Netgear FVS336Gv2 – ProSafe Dual WAN Gigabit Firewall with SSL & IPSec VPN 참조 매뉴얼
Configure the IPv4 LAN Settings
131
ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
4.
If you changed the default domain or were assigned a domain, from the Domain menu,
select the domain.
select the domain.
If you did not change the domain or were not assigned a domain, leave the menu
selection at geardomain.
selection at geardomain.
5.
Click the Login button.
The Router Status screen displays.
6.
Select Network Configuration > LAN Settings > LAN Multi-homing.
The LAN Multi-homing screen displays the IPv4 settings.
7.
In the Available Secondary LAN IPs table, click the Edit button for the secondary IP
address that you want to change.
address that you want to change.
The Edit LAN Multi-homing screen displays.
8.
Change the IP address, subnet mask, or both:
•
IP Address. Change the secondary address that you want to assign to the LAN ports.
•
Subnet Mask. Change the subnet mask for the secondary IP address.
9.
Click the Apply button.
Your settings are saved. The modified secondary IP address displays in the Available
Secondary LAN IPs table on the LAN Multi-homing screen.
Secondary LAN IPs table on the LAN Multi-homing screen.
Remove One or More Secondary LAN IPv4 Addresses
The following procedure describes how to remove one or more existing secondary LAN IPv4
address that you no longer need.
address that you no longer need.
To remove one or more secondary LAN IP addresses:
1.
On your computer, launch an Internet browser.
2.
In the address field of your browser, enter the IP address that was assigned to the VPN
firewall during the installation process.
firewall during the installation process.
The VPN firewall factory default IP address is 192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
3.
In the Username field, type your user name and in the Password / Passcode field, type
your password.
your password.
For the default administrative account, the default user name is admin and the default
password is password.
password is password.
4.
If you changed the default domain or were assigned a domain, from the Domain menu,
select the domain.
select the domain.
If you did not change the domain or were not assigned a domain, leave the menu
selection at geardomain.
selection at geardomain.
5.
Click the Login button.