Netgear FVS336Gv2 – ProSafe Dual WAN Gigabit Firewall with SSL & IPSec VPN 참조 매뉴얼
Configure the IPv6 LAN Settings
155
ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
For stateless DHCPv6 with prefix delegation, you must enable and configure the RADVD,
but
you do not need to add advertisement prefixes to the RADVD because the DHCPv6 server
assigns the prefixes that you specify for the DHCPv6 server.
assigns the prefixes that you specify for the DHCPv6 server.
To set up a stateless DHCPv6 server with prefix delegation in the LAN, complete these
tasks:
tasks:
1.
158).
2.
Specify prefixes and a prefix lengths for the DHCPv6 server (see
163).
3.
Enable and configure the RADVD (see
Concept: Stateful DHCPv6 Server for the LAN
The IPv6 clients in the LAN obtain an interface IP address, configuration information such as
DNS server information, and other parameters from the DHCPv6 server (see ).
DNS server information, and other parameters from the DHCPv6 server (see ).
The IP address is a dynamic address that the DHCPv6 server assigns from IPV6 address
pools that you must configure.
pools that you must configure.
Enable RADVD for default route where configuring prefixes is optional.
To set up a stateful DHCPv6 server in the LAN, complete these tasks:
1.
165).
2.
Add one or more IPv6 address pools for the DHCPv6 server (see
Configure a Stateless DHCPv6 Server Without Prefix
Delegation for the LAN
Delegation for the LAN
With a stateless DHCPv6 server in the LAN, the IPv6 clients in the LAN generate their own IP
address by using a combination of locally available information and router advertisements
from the Router Advertisement Daemon (RADVD), but receive DNS server information from
the DHCPv6 server.
address by using a combination of locally available information and router advertisements
from the Router Advertisement Daemon (RADVD), but receive DNS server information from
the DHCPv6 server.
If you configure a stateless DHCPv6 server in the LAN, you also must enable the RADVD
and configure advertisement prefixes (see
and configure advertisement prefixes (see
154.
To configure a stateless DHCPv6 server without prefix delegation and IPv6 settings for
the LAN:
the LAN:
1.
On your computer, launch an Internet browser.