Netgear FVS336Gv2 – ProSafe Dual WAN Gigabit Firewall with SSL & IPSec VPN 참조 매뉴얼
Configure the IPv6 LAN Settings
181
ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
•
Secondary LAN IP address. 2001:db8:3000::2192 with a prefix length of 10
Add a Secondary LAN IPv6 Address
The following procedure describes how to add a secondary LAN IPv6 address.
To add a secondary LAN IPv6 address:
1.
On your computer, launch an Internet browser.
2.
In the address field of your browser, enter the IP address that was assigned to the VPN
firewall during the installation process.
firewall during the installation process.
The VPN firewall factory default IP address is 192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
3.
In the Username field, type your user name and in the Password / Passcode field, type
your password.
your password.
For the default administrative account, the default user name is admin and the default
password is password.
password is password.
4.
If you changed the default domain or were assigned a domain, from the Domain menu,
select the domain.
select the domain.
If you did not change the domain or were not assigned a domain, leave the menu
selection at geardomain.
selection at geardomain.
5.
Click the Login button.
The Router Status screen displays.
6.
Select Network Configuration > LAN Settings > LAN Multi-homing.
The LAN Multi-homing screen displays the IPv4 settings.
7.
In the upper right, select the IPv6 radio button.
The LAN Multi-homing screen displays the IPv6 settings. The following figure shows one
example.
example.
The Available Secondary LAN IPs table displays the secondary LAN IP addresses added
to the VPN firewall.
to the VPN firewall.