Netgear FVS336Gv2 – ProSafe Dual WAN Gigabit Firewall with SSL & IPSec VPN 참조 매뉴얼
Get an Overview of the Features and Hardware and Log In
20
ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
Back Panel
The back panel of the VPN firewall includes a console port, a cable security lock receptacle,
a recessed Factory Defaults reset button, and an AC power connection.
a recessed Factory Defaults reset button, and an AC power connection.
Figure 2. Back panel
Viewed from left to right, the back panel contains the following components:
•
Console port. Port for connecting to an optional console terminal. The port has a DB9
male connector. The default baud rate is 115200 K. The pinouts are (2) Tx, (3) Rx, (5) and
(7) Gnd. For information about accessing the command-line interface (CLI) using the
console port, see
male connector. The default baud rate is 115200 K. The pinouts are (2) Tx, (3) Rx, (5) and
(7) Gnd. For information about accessing the command-line interface (CLI) using the
console port, see
537.
•
Cable security lock receptacle.
WAN Ports
Left LED
Green
The WAN port has a valid connection with a device that provides an
Internet connection.
Internet connection.
Blinking green
The WAN port receives or transmits data.
Off
The WAN port has no physical link, that is, no Ethernet cable is plugged
into the VPN firewall.
into the VPN firewall.
Right LED
Green
The WAN port operates at 1000 Mbps.
Amber
The WAN port operates at 100 Mbps.
Off
The WAN port operates at 10 Mbps.
Internet LED Green
The WAN port has a valid Internet connection.
Amber
The Internet link is down because the WAN port is in standby mode for
failover. Also, before the connection is up, there is an amber color for a
short period of time.
failover. Also, before the connection is up, there is an amber color for a
short period of time.
Off
The WAN port is either not enabled or has no link to the Internet.
Table 1. LED descriptions (continued)
LED
Activity
Description
Cable security
Console port
Factory Defaults
AC power
receptacle
lock receptcle
reset button