Netgear FVS336Gv2 – ProSafe Dual WAN Gigabit Firewall with SSL & IPSec VPN 참조 매뉴얼

The VPN firewall attempts to make a connection according to the settings that you 
entered.

Verify the connection:

a. Select Network Configuration > WAN Settings > WAN Setup.

The WAN Setup screen displays the IPv4 settings.

b.  In the IPv4 WAN Settings table, click the Status button for the WAN interface for 

which you want to display the connection status. 

The Connection Status pop-up screen displays.

The Connection Status screen shows a valid IP address and gateway. You are 
connected to the Internet.

If the configuration was not successful, see 

If you installed login software, your connection type is most likely PPPoE. To configure a 
PPPoE IPv4 Internet connection, enter the PPPoE IPv4 information that your IPv4 ISP gave 
you. If you do not have this information, contact your IPv4 ISP. 

For each WAN interface, you need the following information: login name, login password, 
and if applicable, account name and domain name. If your ISP assigns you a static IP 
address, you also need the IP address, IP subnet mask, and IP addresses of the primary 
DNS server and secondary DNS server.