Netgear FVS336Gv2 – ProSafe Dual WAN Gigabit Firewall with SSL & IPSec VPN 참조 매뉴얼

The following procedure describes how to remove one or more Mode Config records that you 
do no longer need in IKE policies.

Before you remove a Mode Config record, make sure that it is not 
used in an IKE policy. If it is, remove the Mode Config record from the 
IKE policy. For information about how to change an IKE policy, see 

375.



On your computer, launch an Internet browser.

In the address field of your browser, enter the IP address that was assigned to the VPN 
firewall during the installation process.

The VPN firewall factory default IP address is 192.168.1.1.

The NETGEAR Configuration Manager Login screen displays.

In the Username field, type your user name and in the Password / Passcode field, type 
your password.

For the default administrative account, the default user name is admin and the default 
password is password.

If you changed the default domain or were assigned a domain, from the Domain menu, 
select the domain.

If you did not change the domain or were not assigned a domain, leave the menu 
selection at geardomain.

Click the Login button.

The Router Status screen displays.

Select VPN > IPSec VPN > Mode Config. 

The Mode Config screen displays.

In the List of Mode Config Records table, select the check box to the left of each record that 
you want to remove or click the Select All button to select all records.

Click the Delete button.

The selected Mode Config records are removed from the List of Mode Config Records 
table.

The following sections provide information about how to configure keep-alives and Dead 
Peer Detection: