Netgear FVS336Gv2 – ProSafe Dual WAN Gigabit Firewall with SSL & IPSec VPN 참조 매뉴얼

Click the Apply button.

Your settings are saved.

The following procedure describes how to view all active L2TP users and disconnect active 
L2TP users.



On your computer, launch an Internet browser.

In the address field of your browser, enter the IP address that was assigned to the VPN 
firewall during the installation process.

The VPN firewall factory default IP address is 192.168.1.1.

The NETGEAR Configuration Manager Login screen displays.

In the Username field, type your user name and in the Password / Passcode field, type 
your password.

For the default administrative account, the default user name is admin and the default 
password is password.

If you changed the default domain or were assigned a domain, from the Domain menu, 
select the domain.

If you did not change the domain or were not assigned a domain, leave the menu 
selection at geardomain.

Click the Login button.

The Router Status screen displays.

Select VPN > Connection Status > L2TP Active Users.

The L2TP Active Users screen displays. The following figure does not show any active 
users.

Ending IP Address

The last IP address of the pool. A maximum of 26 contiguous addresses is 
supported. (The first address of the pool cannot be assigned to a user.)

Idle Timeout

The period after which an idle user is automatically logged out of the L2TP server. 
The default idle time-out period is 5 minutes.

Select one or more of the following authentication methods to authenticate L2TP users:

PAP. RADIUS-Password Authentication Protocol (PAP).

CHAP. RADIUS-Challenge Handshake Authentication Protocol (CHAP).

MSCHAP. RADIUS-Microsoft CHAP (MSCHAP).

MSCHAPv2. RADIUS-Microsoft CHAP version 2 (MSCHAPv2).