Netgear FVS336Gv2 – ProSafe Dual WAN Gigabit Firewall with SSL & IPSec VPN 참조 매뉴얼

Click the Apply button.

Your settings are saved.

The following sections provide information about managing the LAN IPv4 traffic meter:

Increase this month 
limit by

Select this check box to temporarily increase a previously specified monthly traffic 
volume limit, and enter the additional allowed volume in MB. The default setting is

 0 

MB.

When you click the Apply button to save these settings, this field is reset to 0 

MB so that the increase is applied only once.

This month limit

This is a nonconfigurable field that displays the total monthly traffic volume limit that 
applies to this month. This total is the sum of the monthly traffic volume and the 
increased traffic volume.

Restart Traffic 
Counter

Select when the traffic counter restarts:

Restart Traffic Counter Now. Select this option and click the Apply button at 
the bottom to restart the traffic counter immediately. 

Restart Traffic Counter at a Specific Time. Restart the traffic counter at a 
specific time and day of the month. Complete the time fields and select the 
meridiem and the day of the month from the menus.

Send e-mail report 
before restarting 
counter

An email report is sent immediately before the counter restarts. Ensure that emailing 

of logs is enabled (see 

Block Traffic

Select which action the VPN firewall performs when the traffic limit is reached:

Block All Traffic. All incoming and outgoing Internet and email traffic is 
blocked. 

Block All Traffic Except E-Mail. All incoming and outgoing Internet traffic is 
blocked but incoming and outgoing email traffic is still allowed.

Send e-mail alert

An email alert is sent when traffic is blocked. Ensure that emailing of logs is enabled