Netgear FVS336Gv2 – ProSafe Dual WAN Gigabit Firewall with SSL & IPSec VPN 참조 매뉴얼

If you changed the default domain or were assigned a domain, from the Domain menu, 
select the domain.

If you did not change the domain or were not assigned a domain, leave the menu 
selection at geardomain.

Click the Login button.

The Router Status screen displays.

Select Monitoring > Firewall Logs & E-mail. 

The Firewall Logs & E-mail screen displays.

Click the NTP Logs option arrow in the upper right.

The NTP Logs screen displays.

To clear the logs, click the Clear Log button.

To refresh the information onscreen, click the Refresh Log button.

This section describes how to send syslogs from one site to another over a 
gateway-to-gateway VPN tunnel.

The high-level steps that describe the actions that you must take to send syslogs from one 
site to another over a gateway-to-gateway VPN tunnel, that is, a VPN tunnel between two 
VPN firewalls:

At Site 1, set up a syslog server that is connected to Gateway 1.

At Site 1, change the remote IP address in the VPN policy on Gateway 1 to the WAN IP