Netgear FVS336Gv2 – ProSafe Dual WAN Gigabit Firewall with SSL & IPSec VPN 참조 매뉴얼

System Logs and Error Messages

645

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2

IPSec Restart

This section describes logs that are generated when IPSec restarts.

Unicast, Multicast, and Broadcast Logs

ICMP Redirect Logs

Table 19. System logs: IPSec restart

Message

Jan 23 16:20:44 [FVS336Gv2] [wand] [IPSEC] IPSEC Restarted

Explanation

Log generated when the IPSec is restarted.

This message is logged when IPSec restarts after any changes in the configuration
are applied.

Recommended action

None

Table 20. System logs: unicast

Message

Nov 24 11:52:55 [FVS336Gv2] [kernel] UCAST IN=SELF OUT=WAN SRC=
192.168.10.1 DST=192.168.10.10 PROTO=UDP SPT=800 DPT=2049

Explanation

•

This packet (unicast) is sent to the device from the WAN network.

•

For other settings, see

Recommended action

None

Table 21. System logs: unicast, redirect

Message

Feb 2007 22 14:36:07 [FVS336Gv2] [kernel] [LOG_PACKET] SRC=192.168.1.49
DST=192.168.1.124 PROTO=ICMP TYPE=5 CODE=1

Explanation

This packet is an ICMP redirect message sent to the device by another device. For
other settings, see

Recommended action

To enable these logs, from the CLI command prompt of the VPN firewall, enter this
command:

monitor/firewallLogs/logger/loggerConfig logIcmpRedirect 1

And to disable it enter:

monitor/firewallLogs/logger/loggerConfig logIcmpRedirect 0