Netgear FVS318N – Prosafe Wireless N VPN Firewall 전단

security-config[porttriggering-rules]> incoming_start_port 30030 

security-config[porttriggering-rules]> incoming_end_port 30040 

security-config[porttriggering-rules]> save

This command configures an existing port triggering rule. After you have issued the 
security porttriggering_rules edit

 command to specify the row to be edited, you 

enter the security-config [porttriggering-rules] mode, and then you can configure one keyword 
and associated parameter or associated keyword at a time in the order that you prefer. You 
cannot change the name of the rule.

security

security-config [porttriggering-rules] 

 or N 

Enables or disables the port triggering rule.

 or UDP

Specifies whether the port uses the TCP or UDP 
protocol.

The start port number (integer) of the outgoing 
traffic range. Valid numbers are from 0 to 65535.

The end port number (integer) of the outgoing traffic 
range. Valid numbers are from 0 to 65535.

The start port number (integer) of the incoming 
traffic range. Valid numbers are from 0 to 65535.

The end port number (integer) of the incoming traffic 
range. Valid numbers are from 0 to 65535.

security porttriggering_rules edit <row id>

enable_rule {Y | N}

protocol {TCP | UDP}

outgoing_start_port <number>

outgoing_end_port <number>

incoming_start_port <number>

incoming_end_port <number>

outgoing_start_port number

incoming_start_port number