Netgear FVS318N – Prosafe Wireless N VPN Firewall 전단

SSL VPN Client Commands

This command configures the SSL client IP address range. After you have issued the vpn 
sslvpn client ipv4

 command, you enter the vpn-config [sslvpn-client-ipv4-settings] 

mode, and then you can configure one keyword and associated parameter or associated 
keyword at a time in the order that you prefer.

vpn

enable_full_tunnel {Y | N}

dns_suffix <suffix>

primary_dns <ipaddress>

secondary_dns <ipaddress>

begin_client_address <ipaddress> 

end_client_address <ipaddress>

vpn-config [sslvpn-client-ipv4-settings]

 or N 

Enables or disables full-tunnel support:

•  Yes. Enables full-tunnel support.

•  No. Disables full-tunnel support and enables 

split-tunnel support. If you enable split-tunnel 
support and you assign an entirely different 
subnet to the VPN tunnel clients from the 
subnet that is used by the local network, you 
need to add a client route to ensure that a VPN 
tunnel client connects to the local network over 
the VPN tunnel (see the 

command).

The DNS suffix to be appended to incomplete 
DNS search strings. This setting is optional.

The IP address of the primary DNS server. This 
setting is optional.

If you do not assign a DNS server, the 

DNS settings remain unchanged in the VPN 
client after a VPN tunnel has been established.

The IP address of the secondary DNS server. 
This setting is optional.