Netgear FVS318N – Prosafe Wireless N VPN Firewall 빠른 설정 가이드
1
IPv4 LAN Defaults and DHCP
Address Reservation
This quick start guide provides the IPv4 LAN defaults and DHCP address reservation information
for the ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N. For information about more
complicated features, and for complete configuration steps, see the Reference Manual. This
quick start guide contains the following sections:
for the ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N. For information about more
complicated features, and for complete configuration steps, see the Reference Manual. This
quick start guide contains the following sections:
•
•
•
Note:
For more information about the topics covered in this guide, visit the
FVS318N support website at
. You will
also find the Reference Manual at the support website.
IPv4 LAN Default Settings
The default IPv4 LAN settings that are shown in the following table should be sufficient for
most small business networks and do not require further configuration:
most small business networks and do not require further configuration:
Table 1. Default IPv4 LAN settings
Item
Default Setting
LAN IPv4 address for the default VLAN
192.168.1.1
LAN IPv4 subnet mask for the default VLAN
255.255.255.0
VLAN 1 membership
All ports
LAN DHCP server for the default VLAN
Enabled
LAN DHCP IPv4 starting address for the default VLAN
192.168.1.100
LAN DHCP IPv4 ending address for the default VLAN
192.168.1.254