Netgear FVS318N – Prosafe Wireless N VPN Firewall 빠른 설정 가이드
Reset the Configuration to Default Settings
2
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
b. Click the Default button.
The wireless VPN firewall reboots. During the reboot process, the Settings Backup and
Firmware Upgrade screen might remain visible, or a status message with a counter might
show the number of seconds left until the reboot process is complete. The reboot process
takes about 165 seconds. (If you can see the unit: The reboot process is complete when
the Test LED on the front panel goes off.)
Firmware Upgrade screen might remain visible, or a status message with a counter might
show the number of seconds left until the reboot process is complete. The reboot process
takes about 165 seconds. (If you can see the unit: The reboot process is complete when
the Test LED on the front panel goes off.)
Note:
After rebooting with factory default settings, the wireless VPN
firewall’s password is password, and the LAN IPv4 address is
192.168.1.1. For more information about the default settings, see
Appendix A, “Default Settings and Technical Specifications,” in the
Reference Manual.
192.168.1.1. For more information about the default settings, see
Appendix A, “Default Settings and Technical Specifications,” in the
Reference Manual.