Netgear FVS318N – Prosafe Wireless N VPN Firewall 참조 매뉴얼

The LAN DMZ Rules screen allows you to create rules that define the movement of traffic 
between the LAN and the DMZ. The default outbound and inbound policies are to block all 
traffic between the local LAN and DMZ network. You can then apply firewall rules to allow 
specific types of traffic either going out from the LAN to the DMZ (outbound) or coming in 
from the DMZ to the LAN (inbound).

There is no drop-down list that lets you set the default outbound policy as there is on the LAN 
WAN Rules screen. You can change the default outbound policy by allowing all outbound 
traffic and then blocking specific services from passing through the wireless VPN firewall. You 
do so by adding outbound service rules (see 

156).



Select Security > Firewall > LAN DMZ Rules. In the upper right of the screen, the IPv4 radio 
button is selected by default. The LAN DMZ Rules screen displays the IPv4 settings. (The 
following figure contains examples.)

To change an existing outbound or inbound service rule, in the Action column to the right of 
the rule, click one of the following table buttons:

Up. Moves the rule up one position in the table rank. 

Down. Moves the rule down one position in the table rank. 

Edit. Allows you to change the definition of an existing rule. Depending on your selection, 
one of the following screens displays:

Edit LAN DMZ Outbound Service screen for IPv4 (identical to 

Edit LAN DMZ Inbound Service screen for IPv4 (identical to 

158)