Netgear FVS318N – Prosafe Wireless N VPN Firewall 참조 매뉴얼
Virtual Private Networking Using IPSec and L2TP Connections
202
ProSAFE Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Figure 114.
3.
Complete the settings as described in the following table:
Table 43. IPSec VPN Wizard settings for an IPv6 gateway-to-gateway tunnel
Setting
Description
About VPN Wizard
This VPN tunnel will connect
to the following peers
to the following peers
Select the Gateway radio button. The local WAN port’s IP address or
Internet name displays in the End Point Information section of the screen.
Internet name displays in the End Point Information section of the screen.
Connection Name and Remote IP Type
What is the new Connection
Name?
Name?
Enter a descriptive name for the connection. This name is used to help you
to manage the VPN settings; the name is not supplied to the remote VPN
endpoint.
to manage the VPN settings; the name is not supplied to the remote VPN
endpoint.
What is the pre-shared key?
Enter a pre-shared key. The key needs to be entered both here and on the
remote VPN gateway. This key needs to have a minimum length of
8
remote VPN gateway. This key needs to have a minimum length of
8
characters and should not exceed 49 characters.
End Point Information
a
What is the Remote WAN’s IP
Address or Internet Name?
Enter the IPv6 address or Internet name (FQDN) of the WAN interface on
the remote VPN tunnel endpoint.
the remote VPN tunnel endpoint.
What is the Local WAN’s IP
Address or Internet Name?
When you select the Gateway radio button in the About VPN Wizard
section of the screen, the IPv6 address of the wireless VPN firewall’s active
WAN interface is automatically entered.
section of the screen, the IPv6 address of the wireless VPN firewall’s active
WAN interface is automatically entered.