Netgear FVS318N – Prosafe Wireless N VPN Firewall 참조 매뉴얼
Virtual Private Networking Using IPSec and L2TP Connections
246
ProSAFE Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Figure 147.
3.
Complete the settings as described in the following table:
Table 57. Add Mode Config Record screen settings
Setting
Description
Client Pool
Record Name
A descriptive name of the Mode Config record for identification and management
purposes.
First Pool
Assign at least one range of IP pool addresses in the First Pool fields to enable the
wireless VPN firewall to allocate these to remote VPN clients. The Second Pool and
Third Pool fields are optional. To specify any client pool, enter the starting IP
address for the pool in the Starting IP field, and enter the ending IP address for the
pool in the Ending IP field.
Third Pool fields are optional. To specify any client pool, enter the starting IP
address for the pool in the Starting IP field, and enter the ending IP address for the
pool in the Ending IP field.
Note:
No IP pool should be within the range of the local network IP addresses. Use
a different range of private IP addresses such as 172.16.xxx.xx.
Second Pool
Third Pool